Crown Victoria V8-4.6L Flex Fuel (2008)
Speaker: Testing and Inspection
SPEAKER WALK-AROUND TEST
NOTE: To enter the speaker walk-around test, the audio unit must be turned on and in radio tuner mode (AM/FM).
1. To enter the speaker walk-around test, simultaneously press and hold the audio unit preset buttons 3 and 6 (1 and 3 for ULC radio only) for
approximately 3 seconds, then release.
2. The speaker walk-around test stops and applies sound to each speaker for about 1-2 seconds. Each speaker is tested and displayed on the audio
unit in the following sequence: RF, LF, LR, RR.