Crown Victoria V8-4.6L Flex Fuel (2008)
Keyless Entry Key-Pad: Testing and Inspection
KEYLESS ENTRY KEYPAD CODE PROGRAMMING
1. Enter the permanent factory keyless entry keypad code.
2. Press the 1/2 button within 5 seconds to activate the programming mode. Holding the 1/2 button for more than 2 seconds erases all stored
customer codes. The existing codes do not need to be erased to program new codes.
3. NOTE: Each number must be entered within 5 seconds of each other.
Enter the new 5-digit keyless entry keypad code.
4. To associate the new code with personality positions, press the 1/2 button within 5 seconds of entering the fifth digit of the new code for position 1
or 3/4 button for position 2 or 5/6, 7/8, or 9/0 for a third personal code. The door locks lock and unlock, confirming the new code is programmed.
5. After all new keyless entry keypad codes are programmed:
-
press keyless entry keypad buttons 7/8 and 9/0 at the same time to exit the program mode.
-
wait for 5 seconds; the driver door module (DDM) will exit the program mode automatically.
