Crown Victoria V8-4.6L Flex Fuel (2008)
personal injury or death in a crash.
-
Front seat backrest trim covers installed on seats equipped with seat side air bags cannot be repaired. A new trim cover must be installed.
Cleaning is permissible. Failure to follow these instructions may result in the seat side air bag module deploying incorrectly and increase the
risk of serious personal injury or death in a crash.
Install the side air bag module onto the front seat backrest frame mounting bracket. Install the nuts.
-
The deployment chute should not have any wrinkles or folds where it contacts the seat back frame mounting bracket.
-
Tighten to 7 Nm (62 lb-in).
11. Reposition the backrest foam pad and trim cover to the backrest frame.
12. NOTE: The backrest frame and side air bag module have been removed for clarity.
Make sure the deflector flap lays flat between the backrest trim cover and backrest foam pad.
All vehicles
13. Install the head restraint.
14. Install the front seat backrest.
15. Repower the SRS.
