Crown Victoria V8-4.6L Flex Fuel (2008)
5. Remove the bolt, position the A/C condenser and the power steering cooler away from the radiator, and remove the radiator.
^
To install, tighten to 10 Nm (89 inch lbs.).
6. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and
procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury.
NOTE: Do not reuse hose clamps. Instead, use appropriately sized worm-style clamps in place of the constant tension clamps.
To install, reverse the removal procedure. If equipped with fire suppression system, repower the system.
7. Fill and bleed the cooling system.