Crown Victoria V8-4.6L Flex Fuel (2008)
Water Pump: Service and Repair
Coolant Pump
Removal and Installation
1. WARNING: Before servicing a vehicle equipped with a fire suppression system, depower the system by following the procedure in Fire
Suppression System. Failure to follow the instructions may result in serious personal injury.
Drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding.
2. Loosen the 4 coolant pump pulley bolts.
3. Remove the accessory drive belt. For additional information, refer to Drive Belts, Mounts, Brackets and Accessories.
4. Remove the 4 bolts and the coolant pump pulley.
^
To install, tighten to 25 Nm (18 ft. lbs.).
5. Remove the 4 bolts and the coolant pump.