Crown Victoria V8-4.6L Flex Fuel (2008)
6. Install the camshaft sprocket and bolt. Tighten the bolt in 2 stages.
^
Stage 1: Tighten to 40 Nm (30 ft. lbs.).
^
Stage 2: Tighten an additional 90 degrees (1/4 turn).
7. Install the timing chains.
8. Install the roller followers.
9. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and
procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury.
If equipped with fire suppression system, repower the system.