Crown Victoria V8-4.6L Flex Fuel (2008)
4. Connect the EOP switch electrical connector.
5. NOTE: Lubricate the oil filter seal with clean engine oil.
Install the oil filter.
6. Fill the crankcase with clean engine oil.
7. Connect the lower radiator hose to the oil filter adapter.
8. Fill and bleed the cooling system.
9. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and
procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury.
If equipped with fire suppression system, repower the system.
