Crown Victoria V8-4.6L Flex Fuel (2008)
Blower Motor Switch: Service and Repair
Blower Motor Speed Control
BLOWER MOTOR SPEED CONTROL
Removal and Installation
1. Drain the engine coolant.
2. Remove the nuts and position the vapor management valve (VMV) aside.
3. Release the clamps and disconnect the heater hoses from the heater core.
4. Release the clamp and remove the heater hose.
5. Remove the blower motor speed control.
1
Disconnect the blower motor speed control electrical connector.
2
Remove the 2 blower motor speed control screws.
3
Remove the blower motor speed control.
