Crown Victoria V8-4.6L Flex Fuel (2008)
Spot Lamp: Service and Repair
SPOTLAMP
Removal and Installation
NOTE: Unity stoplamp shown; all others similar.
1. Disconnect the battery.
2. NOTE: To remove the handle assembly, the screw and wedge must be completely removed.
Remove the handle assembly.
1
Remove the set screw.
2
Remove the wedge.
3
Disconnect the electrical connector.
3. Remove the windshield side garnish molding.
4. Remove the inside tube bracket.
1
Remove the set screw.
2
Remove the screws.
5. Remove the spotlamp assembly.
-
Remove the screws and slide the assembly out.