ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Fluid Filter - A/T|Service and Repair|Page 1108 > < Evaporative Canister Filter|Service and Repair|Page 1104
Page 1
background image

Fluid Filter - A/T: Service and Repair

Fluid Pan, Gasket and Filter

Removal

CAUTION: Do not use any supplemental transmission fluid additives or cleaning agents. The use of these products could cause internal
transmission components to fail; this will affect the operation of the transmission.

Use of a fluid other than specified may result in transmission failure.

NOTE: Normal maintenance requires periodic automatic transmission fluid changes. If a major repair, such as a clutch, band or bearing is required,
the automatic transmission must be removed for repair.

1. WARNING: Before servicing a vehicle equipped with a fire suppression system, depower the system by following the procedure in Fire

Suppression System. Failure to follow the instructions may result in serious personal injury.

With the vehicle in NEUTRAL, position it on a hoist.

2. Drain the transmission fluid.

^

Loosen the transmission fluid pan bolts and allow the fluid to drain. After the fluid has drained, remove the bolts.

3. Remove the transmission fluid pan and transmission fluid pan gasket.

4. Pull down evenly and remove the transmission fluid filter and seal.

Fluid Filter - A/T|Service and Repair|Page 1108 > < Evaporative Canister Filter|Service and Repair|Page 1104