Crown Victoria V8-4.6L Flex Fuel (2008)
RH Side
Removal and Installation
1. Remove the ignition coil-on-plugs.
2. CAUTION: Only use hand tools when removing or installing the spark plugs, or damage can occur to the cylinder head or spark plug.
NOTE: Use compressed air to remove any foreign material from the spark plug well before removing the spark plugs.
Remove the spark plugs.
-
To install, tighten to 18 Nm (13 lb-ft).
3. Inspect the spark plugs.
4. To install, reverse the removal procedure.
-
Adjust the spark plug gap as required.