Crown Victoria V8-4.6L Flex Fuel (2008)
Removal and Installation
1. WARNING: Before servicing a vehicle equipped with a fire suppression system, depower the system by following the procedure in Fire
Suppression System. Failure to follow the instructions may result in serious personal injury.
With the vehicle in NEUTRAL, position it on a hoist.
2. Rotate the tensioner and remove the drive belt from the A/C compressor pulley.
3. Disconnect the A/C compressor field coil electrical connector.
4. Disconnect the crankshaft position sensor (CKP) sensor electrical connector.
5. Remove the nut and detach the 2 wiring harness clips.
-
To install, tighten to 9 Nm (80 lb-in).
