Crown Victoria V8-4.6L Flex Fuel (2008)
3. Remove the bolt and safety seat tether anchor.
-
To install, tighten to 25 Nm (18 lb-ft).
4. WARNING: Always tighten the child safety seat tether anchor/bolt to specification. Failure to follow this instruction may result in the
child's safety seat being incorrectly secured, which increases the risk of serious personal injury or death to the child in a sudden stop or
crash.
To install, reverse the removal procedure.
5. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and
procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury.
For police vehicles equipped with fire suppression, repower the fire suppression system.
6. Check the active restraint system for correct operation.
