Crown Victoria V8-4.6L Flex Fuel (2008)
Suppression System. Failure to follow the instructions may result in serious personal injury.
For police vehicles equipped with fire suppression, depower the fire suppression system.
2. Remove the parcel shelf trim panel.
3. Remove the 2 safety belt retractor bolts.
-
To install, tighten to 40 Nm (30 lb-ft).
4. Remove the bolt and safety belt guide.
-
To install, tighten to 40 Nm (30 lb-ft).
5. Remove the nut and safety belt anchor.
-
To install, tighten to 55 Nm (41 lb-ft).
6. Remove the safety belt retractor.
7. To install, reverse the removal procedure.
8. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and
procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury.
For police vehicles equipped with fire suppression, repower the fire suppression system.
9. Check the active restraints for correct operation.