Crown Victoria V8-4.6L Flex Fuel (2008)
2. NOTE: Manual shift lever shaft must be in the NEUTRAL position.
Using the special tool, align the digital TR sensor slots. The tool is designed to fit snugly.
3. CAUTION: Tightening one screw before tightening the other may cause the sensor to bind or become damaged.
Tighten the screws in an alternating sequence.
^
Tighten to 9 Nm (80 lb-inch).
4. With the manual lever in overdrive, connect the selector lever cable.
^
Tighten to 30 Nm (22 lb-ft).
