Crown Victoria V8-4.6L Flex Fuel (2008)
6. While holding the cam bolt, tighten the nut to 238 Nm (176 lb-ft).
7. Recheck the camber, caster and toe and adjust as needed.
Caster
8. NOTE: Caster adjustment can effect camber and toe settings.
NOTE: The LH caster bushing may have a centering washer that needs to be removed and discarded prior to adjustment.
Loosen the rearward lower arm bushing-to-lower arm nut and move the lower arm inward to decrease the caster and outward to increase the caster.
^
Snug the retaining nut.
9. Recheck the camber, caster and toe and adjust as needed.
10. NOTE: Do not tighten the bushing retaining nut until the weight of the vehicle is resting on the wheel and tire assemblies.
While holding the lower arm, tighten the lower arm bushing-to-lower arm nut to 175 Nm (128 lb-ft).
11. Recheck the camber, caster and toe and adjust as needed.
12. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and
procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury.
If equipped with fire suppression system, repower the system.
