Crown Victoria V8-4.6L Flex Fuel (2008)
8. Separate the locking inserts and disconnect the 2 restraint system diagnostic tools from the passenger air bag module jumper harness electrical
connectors.
9. CAUTION:
-
The passenger air bag module jumper harness electrical connectors are unique and cannot be reversed when connected to the
passenger air bag module. Match the electrical connector key to the keyway in the passenger air bag module. Do not force the
electrical connectors into the passenger air bag module. Failure to follow this instruction may result in component damage or system
failure.
-
Care must be taken when connecting the passenger air bag module electrical connectors to prevent damage to the electrical connector
terminals and the passenger air bag module pins.
-
Carefully align the locking inserts to the electrical connectors or damage may result.
Align and connect the passenger air bag module jumper harness electrical connectors to the passenger air bag module and install the locking
inserts.
10. Make sure the J-nuts on the passenger air bag module are fully seated into the slots.
11. CAUTION: Do not handle the passenger air bag module by grabbing the edges of the deployment doors. Damage to the air bag module
may occur.
