Crown Victoria V8-4.6L Flex Fuel (2008)
Install the passenger air bag module into the instrument panel.
1
Position the passenger air bag module into the instrument panel.
2
Install the 2 bolts.
-
Tighten to 3 Nm (27 lb-in).
12. Through the glove compartment opening, install the 2 passenger air bag module bolts.
-
Tighten to 9 Nm (80 lb-in).
13. Connect the passenger air bag module electrical connector and attach the pin-type retainer to the bracket.
14. Install the trim panel.
1
Connect the rear window defrost switch electrical connector.
2
If equipped, connect the clock electrical connector.
3
Connect the PAD indicator.
4
Align the retaining clips, slide the trim panel to the left and push in, seating the retaining clips.
