ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Steering Shaft > < Steering Gear Valve|Page 4655
Page 3
background image

^

To install, tighten to 20 Nm (15 lb-ft).

9. NOTE: When connecting a fitting with an O-ring seal, a new seal must be installed.

To install, reverse the removal procedure.
^

Fill the power steering system.

10. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and

procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury.

If equipped with fire suppression system, repower the system.

Steering Shaft > < Steering Gear Valve|Page 4655