Crown Victoria V8-4.6L Flex Fuel (2008)
Lower Arm
Removal
CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure may
result in major service expense. New fasteners must be installed with the same part number or an equivalent part if installation is necessary.
Do not use a replacement part of lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure
of correct retention of these parts. Orientation of the fasteners is also important on all rear suspension arms. Make sure the fasteners are
installed in the same direction as they were in when removed.
1. For reference during the installation procedure, measure the distance from the lip of the fender to the center of the wheel hub with the vehicle in a
static level ground position.
2. WARNING: If equipped with fire suppression system, refer to Fire Suppression System for Important Safety Warnings. Failure to follow
