ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Stabilizer Link|Front|Page 4743 > < Suspension Mode Switch|Locations|Page 4737
Page 1
background image

Stabilizer Link: Service and Repair
Front

Stabilizer Bar Link

Stabilizer Bar Link

Removal and Installation

CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure may
result in major service expense. New parts must be installed with the same part numbers or equivalent part, if replacement is necessary. Do
not use a replacement part of lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure
correct retention of these parts.

1. WARNING: Before servicing a vehicle equipped with a fire suppression system, depower the system by following the procedure in Fire

Suppression System. Failure to follow the instructions may result in serious personal injury.

Remove the wheel and tire.

2. CAUTION: Do not allow the caliper and anchor plate assembly to hang from the brake hose or damage to the hose may occur.

Remove the bolts and position the caliper, pads and anchor plate assembly aside.
^

Support the caliper and anchor plate assembly using mechanic's wire.

Stabilizer Link|Front|Page 4743 > < Suspension Mode Switch|Locations|Page 4737