Crown Victoria V8-4.6L Flex Fuel (2008)
3. Disconnect the electrical connector and the air tube in the following sequence.
1. Disconnect the electrical connector.
2. Compress the quick connect lock ring and pull out on the air tube.
4. CAUTION: Remove any dirt or other foreign material from the air spring assembly prior to removing the air spring solenoid valve from
the air spring assembly or damage to the air spring solenoid may occur.
Remove the air spring solenoid retainer.
5. WARNING: Vent all air pressure from the air suspension system prior to disconnecting or removing any air suspension components. It is
dangerous to remove air suspension components while under pressure. Failure to follow this instruction may result in serious personal
injury.
Rotate the air spring solenoid and remove the solenoid.
6. NOTE: Inspect the O-ring for damage and install a new O-ring as necessary. Lubricate the solenoid seal area with silicone grease.
NOTE: When installing the air tubes, make sure the white tube is fully inserted into the fitting for correct installation.
To install, reverse the removal procedure.