Crown Victoria V8-4.6L Flex Fuel (2008)
8. Tighten the lateral arm-to-frame bolts to 90 Nm (66 lb-ft).
9. Lower the axle and remove the suitable jack or jackstands.
10. Connect the stabilizer bar to the stabilizer bar links.
1. Rotate the stabilizer bar onto the links and install the bushings.
2. Install the nuts and tighten to 20 Nm (15 lb-ft).
11. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and
procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury.
If equipped with fire suppression system, repower the system.
