Crown Victoria V8-4.6L Flex Fuel (2008)
3. Tighten the wheel nut until the wheel stud head seats against the back side of the axle flange.
4. Remove the wheel nut and washers.
5. Install the brake disc.
6. Position the brake disc and caliper and install the bolts.
^
Tighten to 27 Nm (20 lb-ft).
7. Position the wheel speed sensor and install the bolt.
^
Tighten to 7 Nm (62 lb-inch).
8. Install the wheel and tire.
9. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and
procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury.
If equipped with fire suppression system, repower the system.
