Crown Victoria V8-4.6L Flex Fuel (2008)
21. NOTE: To maintain driveshaft balance, install the driveshaft yoke and flange in the original position that was marked during removal.
Install the 4 retaining bolts.
^
Tighten to 103 Nm (76 lb-ft).
22. Lower the vehicle.
23. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and
procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury.
Check the level of the transmission fluid. Add clean automatic transmission fluid as necessary.
