Crown Victoria V8-4.6L Flex Fuel (2008)
3. Install the manual valve detent lever spring and bolt.
^
Tighten to 10 Nm (89 lb-inch).
4. CAUTION: If installing a new filter and the seal remains in the main control bore, carefully use a small screwdriver to remove the seal.
Use care not to damage the main control bore.
NOTE: If transmission is being serviced for a contamination-related failure, use a new filter and seal. The filter may be reused if no excessive
contamination is present.
Install a new fluid filter and seal as required.
5. Position the pan magnet into the transmission fluid pan.
