ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Selector Lever Cable Adjustment - Floor Shift|Page 3464 > < Selector Lever Cable Adjustment - Floor Shift
Page 2
background image

7. Move the selector lever from detent to detent and compare it with the transmission setting. Verify that the engine will start in PARK and

NEUTRAL and that the reversing lamps illuminate in REVERSE. If not, repeat the adjustment procedure.

8. Check that the transmission range (TR) sensor adjustment is correct. Adjust the TR sensor if necessary.
9. After completing all adjustments, and with the vehicle on the ground, turn on the electrical power to the air suspension, if equipped.

10. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and

procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury.

If equipped with fire suppression system, repower the system.

Selector Lever Cable Adjustment - Floor Shift|Page 3464 > < Selector Lever Cable Adjustment - Floor Shift