Crown Victoria V8-4.6L Flex Fuel (2008)
Shift Cable: Adjustments
Selector Lever Cable Adjustment -Column Shift
Selector Lever Cable Adjustment - Column Shift
1. WARNING: Shut off the electrical power to the air suspension system prior to hoisting or jacking an air suspension equipped vehicle.
Failure to do so may result in unexpected inflation or deflation of the air springs, which may result in shifting of the vehicle during these
operations. Failure to follow this instruction may result in serious personal injury.
If equipped, turn the air suspension switch to the OFF position.
2. WARNING: Before servicing a vehicle equipped with a fire suppression system, depower the system by following the procedure in Fire
Suppression System. Failure to follow the instructions may result in serious personal injury.
With the vehicle in NEUTRAL, position it on a hoist.
3. Place the selector lever in the (D) position.
4. Hang a 1.4 kg (3 lb) weight on the selector lever.
5. Remove the nut, and disconnect the selector lever cable from the manual control lever.
6. Position the manual control lever in the (D) position.
1. Pull the manual control lever forward until travel stops.
2. Push the manual control lever backward 2 detents to the (D) position.
7. Connect the selector lever cable to the manual control lever, and install the nut.
^
Tighten to 30 Nm (22 lb-ft).
