Crown Victoria V8-4.6L Flex Fuel (2008)
Installation
All vehicles
1. Using the special tool, install the new differential bearings.
1. Position the bearings.
2. Using the special tool, press the bearings on the differential case.
2. Position the differential ring gear and the differential case. Align the bolt holes by starting 2 bolts through the holes in the differential case and the
differential ring gear. Press the differential ring gear on the differential case.
3. NOTE: Clean the threads of the ring gear bolts. Make sure they are free of foreign material.
Install the 10 bolts.
^
Apply stud and bearing mount to the bolt threads.
^
Tighten to 114 Nm (84 lb-ft).
4. With the pinion depth set and pinion installed, place the differential assembly in the differential housing.
