Crown Victoria V8-4.6L Flex Fuel (2008)
12. Tighten the front door glass run channel bolts to 12 Nm (9 lb-ft).
13. Cycle the window glass to verify the window functions correctly.
14. Turn the ignition key to the OFF position.
15. Disconnect the window control switch electrical connectors.
16. Reposition the watershield.
17. Install the front door panel.
Rear Door Window Glass Adjustment
1. Remove the rear door trim panel.
2. Position the watershield aside.
3. Connect the window control switch electrical connectors.
4. Turn the ignition key to the ON position.
5. Partially lower the door glass.
6. Loosen the top regulator nuts a minimum of 3 full threads.
7. Loosen the 2 rear door glass run bolts a minimum of 3 full threads.
