Crown Victoria V8-4.6L SOHC VIN W (2005)
Front Bumper Cover / Fascia: Service and Repair
FRONT BUMPER COVER
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. NOTE: The RH is shown, the LH is similar.
Remove the 6 lower radiator air deflector bolts, the 2 front bumper cover bolts, and the 4 pin-type retainers.
3. Remove the 6 pin-type retainers (3 each side).
4. Remove the side turn signal lamp assemblies.
5. Remove the 2 front bumper cover screws (1 each side).