Crown Victoria V8-4.6L SOHC VIN W (2005)
8. Remove the screws and the passenger assist handles.
9. Remove the rear quarter trim panel.
10. Remove the pin-type retainers.
Vehicles with roof opening panel
11. CAUTION: Carefully pull the rear of the headliner down to gain access to the rear domelamp electrical connector.
Disconnect the rear domelamp electrical connector.
12. Remove the headliner retainer.
13. Position the headliner.
-
Pull down the sides of the headliner above the door openings.
Vehicles without roof opening panel
14. Disconnect the headliner harness electrical connector at the RH C-pillar.
15. NOTE: Pull down the sides of headliner above the door openings to expose adhesive beads.
Using a hot knife or wide-blade putty knife, cut adhesive beads lengthwise across the headliner.
All vehicles
16. NOTE: A new headliner must be installed if the headliner is folded in half for removal.
Remove the headliner through the front door opening.
