Crown Victoria V8-4.6L SOHC VIN W (2005)
Camshaft: Service and Repair
General Procedures
Camshaft Journal Diameter
1. Measure each camshaft journal diameter in 2 directions.
^
If out of specification, install new components as necessary.
Camshaft Journal Clearance, Plastigage Method
Special Tool(s)
NOTE: The camshaft journals must meet specifications before checking camshaft journal clearance.
1. Remove the camshaft bearing cap and lay Plastigage across the surface.
2. NOTE: Do not turn the camshaft while carrying out this procedure.
Position the camshaft bearing cap and install the bolts.
3. Use Plastigage to verify the camshaft journal clearance.
^
If out of specification, install new components as necessary.
Camshaft End Play OHC Engines
