Crown Victoria V8-4.6L SOHC VIN W (2005)
Fluid Filter - A/T: Service and Repair
Fluid Pan, Gasket and Filter
Material
Removal
CAUTION: Do not use any supplemental transmission fluid additives or cleaning agents. The use of these products could cause internal transmission
components to fail; this will affect the operation of the transmission. Use of an improper fluid could result in transmission failure.
NOTE: Normal maintenance requires periodic automatic transmission fluid changes. If a major repair, such as a clutch, band, bearing, etc., is
required, the automatic transmission must be removed for repair.
1. With the vehicle in NEUTRAL, position it on a hoist. Refer to Maintenance/Service and Repair.
2. Drain the transmission fluid.
^
Loosen the transmission fluid pan bolts and allow the fluid to drain. After the fluid has drained remove the bolts.
3. Remove the transmission fluid pan and transmission fluid pan gasket.
4. Pull down evenly and remove the transmission fluid filter and seal.