Crown Victoria V8-4.6L SOHC VIN W (2005)
4. Remove the brake disc.
5. NOTE: Make sure that the wheel stud being removed is positioned near the access hole on the wheel knuckle prior to installing the special tool.
Using the special tool, press the wheel stud out of the wheel hub flange.
6. Remove the wheel stud.
Installation
1. Install the wheel stud.
1
Install four washers onto the wheel stud.
2
Install the wheel nut. Tighten the wheel nut until the wheel stud seats fully onto the wheel hub flange.
2. Remove the wheel nut and washers.
