Crown Victoria V8-4.6L SOHC VIN W (2005)
Fire Suppression Module: Service and Repair
FIRE SUPPRESSION MODULE
Removal and Installation
1. WARNING:
-
To reduce the risk of accidental deployment, do not use any memory saver devices. Failure to follow these instructions may result in
personal injury.
-
If the vehicle is equipped with a fire suppression system, be sure that nobody is under the vehicle or near the rear axle area when the
battery is connected due to possibility of an accidental fire suppression system deployment. Failure to follow these instructions may
result in personal injury.
Disconnect the battery.
2. Remove the rear seat cushion pad and frame.
1
Apply pressure to the lower front portion of the rear seat cushion pad and frame.
2
Push the rear seat cushion pad and frame rearward to disengage the rear seat cushion front retainers.
3. WARNING: The tightening torque of the fire suppression module (FSM) bolts is critical for correct system operation.
