Crown Victoria V8-4.6L SOHC VIN W (2005)
1. Install the RCM.
1
Position the RCM to the center tunnel area under the instrument panel.
2
Install the bolts.
2. Connect the small RCM electrical connector.
1
Install the bolt.
2
Connect the small RCM electrical connector.
3. Make sure the connector position assurance lever is all the way back and in the full release position before attempting to connect the connector.
4. CAUTION: Putting the large RCM electrical connector into the RCM on an angle can cause bad electrical connections and damage
components.
NOTE: The RCM has been removed for clarity.