Crown Victoria V8-4.6L SOHC VIN W (2005)
12. Detach the side air bag module wiring harness electrical connector at the rear of the cushion frame.
13. Remove the side air bag wiring harness. Note and record the routing of the side air bag wiring harness.
Installation
All vehicles
1. Route the wiring harness as noted during the removal procedure.
2. Attach the side air bag module wire harness electrical connector at the rear of the seat cushion frame.
3. Connect the side air bag module electrical connector.
4. WARNING:
-
Inspect the mounting surfaces of the side air bag module for any foreign objects before installing the side air bag module. If any
foreign objects are found, remove them. Failure to do so may result in personal injury, in the event of an air bag deployment.