Crown Victoria V8-4.6L SOHC VIN W (2005)
Child Seat Tether Attachment: Service and Repair
Child Safety Seat Tether Anchor
CHILD SAFETY SEAT TETHER ANCHOR
Removal and Installation
1. Remove the package tray.
2. Remove the child safety seat tether anchor.
3. WARNING: It is important that the bolt/anchor be securely tightened to specification. Otherwise, the child's safety seat may not be
properly secured and the child can be injured in case of a sudden stop or accident.
NOTE:
-
Rework the sheet metal to its original condition and structural integrity.
-
Install a new child safety seat tether anchor as necessary.
-
Make sure to tighten the bolts to specification.
To install, reverse the removal procedure.
-
See the removal procedure or Specifications for torque specifications.
4. Check the active restraint system for correct operation.
