Crown Victoria V8-4.6L SOHC VIN W (2005)
Fire Suppression Manual Switch: Service and Repair
FIRE SUPPRESSION MANUAL SWITCH
Removal and Installation
1. Disconnect the battery.
2. CAUTION: Care must be taken when releasing the fire suppression manual switch clips to avoid damaging the switch and the headliner.
Release the fire suppression manual switch from the headliner and position it aside.
3. Position the RH and LH front door weatherstrips aside.
4. Remove the RH and LH windshield side garnish mouldings.
5. Remove the RH and LH sun visors and the center receptacles.
6. CAUTION: Care must be taken when lowering the front of the headliner to avoid damaging the headliner.
Lower the front portion of the headliner.
7. Remove the fire suppression manual switch.
-
Disconnect the electrical connector.
8. CAUTION: Care must be taken when installing the fire suppression manual switch to avoid folding or pinching the ribbon harness.
To install, reverse the removal procedure.
