Crown Victoria V8-4.6L SOHC VIN W (2005)
Oxygen Sensor: Service and Repair
Heated Oxygen Sensor (HO2S) - Front
HEATED OXYGEN SENSOR (HO2S) - FRONT
Socket, Exhaust Gas Oxygen Sensor
Special Tool(s)
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the battery ground cable.
3. Disconnect the right side heated oxygen sensor (HO2S) electrical connector.
4. Disconnect the left side HO2S electrical connector.
5. Using the special tool, remove the HO2S.