Crown Victoria V8-4.6L SOHC VIN W (2005)
Remove the two nuts and disconnect the LH and RH stabilizer bar link.
12. NOTE: The hex holding feature can be used to prevent turning of the stud while removing the nut.
Remove the nuts and disconnect the LH and RH tie-rods ends.
13. Remove the two bolts and position the LH and RH brake hose and brackets assemblies aside.
14. Remove the four bolts and position the LH and RH front brake calipers aside.
-
Support the brake calipers away from the crossmember.
15. Position the front LH and RH anti-lock brake system (ABS) harness aside.
1. Release the two ABS harnesses from the support bracket.