Crown Victoria V8-4.6L SOHC VIN W (2005)
Level Control Solenoid Valve: Service and Repair
Air Spring Solenoid Valve
Special Tool(s)
Material
Removal and Installation
1. If the air spring solenoid valve is functional, use the scan tool to vent the appropriate air spring(s).
2. Raise and support the vehicle. Refer to Maintenance/Service and Repair.
3. Disconnect the electrical connector and the air line.
1
Disconnect the electrical connector.
2
Compress the quick connect lock ring and pull out on the air line.
4. CAUTION: Remove any dirt or other foreign material from the air spring assembly prior to removing the air spring solenoid valve from the air
spring assembly.
Remove the air spring solenoid clip.
5. WARNING: The air spring solenoid valve has a two stage release. When removing a non-functional solenoid and the air spring is
inflated, carefully rotate the solenoid counterclockwise until it reaches the first stage to release the air from the air spring. Turn the
solenoid to the second stage to remove the solenoid. Failure to follow these instructions when removing a non-functional air spring
