Crown Victoria V8-4.6L SOHC VIN W (2005)
Suspension Strut / Shock Absorber: Service and Repair
Shock Absorber
Removal and Installation
Removal and Installation
1. WARNING: The electrical power to the air suspension system must be turned off prior to hoisting, jacking or towing an air suspension
vehicle. Failure to do so can result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during
these operations.
Turn the air suspension service switch off.
2. WARNING: Do not remove the center nut. This nut holds the upper spring mount in place and if this nut is removed the spring tension
will be released. Failure to follow these instructions may result in personal injury.
Remove and discard the nuts.
3. Remove the wheel and tire assembly.
4. Remove the bolts and position the caliper, pads and anchor plate aside.
