Crown Victoria V8-4.6L SOHC VIN W (2005)
5. Clean and inspect the transmission fluid pan, transmission fluid pan gasket, and the magnet.
Installation
1. CAUTION: If installing a new filter, and the seal remains in the main control bore, carefully use a small screwdriver to remove the seal. Use care
not to damage the main control bore.
NOTE: If transmission is being serviced for a contamination-related failure, use a new filter and seal. The filter may be reused if no excessive
contamination is present.
Install a new fluid filter and seal as required.
2. Position the pan magnet into the transmission fluid pan.
3. NOTE: The transmission fluid pan gasket is reusable, clean and inspect for damage, if not damaged, the gasket should be reused.
