Crown Victoria V8-4.6L SOHC VIN W (2005)
14. Remove the bolts and remove the parking brake cable bracket and position aside.
15. NOTE: The crossmember is a press fit in the crossmember pocket, it may be necessary to pry the crossmember out of the crossmember pocket.
Be careful not to damage the crossmember.
Lower the RH side of the crossmember.
16. NOTE: The crossmember is a press fit in the crossmember pocket, it may be necessary to pry the crossmember out of the crossmember pocket.
Be careful not to damage the crossmember.
Lower the LH side of the crossmember and remove the crossmember.
Installation
1. Position the LH side of the crossmember into the crossmember pocket and loosely install the bolts.
