Crown Victoria V8-4.6L SOHC VIN W (2005)
12. Install the special tool.
1
Rotate the differential case to verify that the differential bearings have seated correctly.
2
Position the special tool.
^
Make sure there is no differential case endplay.
13. Measure and note the differential case runout.
^
If the runout does not exceed the specification, install a new differential ring gear and pinion.
^
If the runout exceeds the specification, the differential ring gear is true and the concern is due to differential case/differential bearing damage.
Install a new differential case.
14. Using the special tools, remove the differential bearings.
Installation
All vehicles