Crown Victoria V8-4.6L SOHC VIN W (2005)
Remove the differential bearing caps.
1
Remove the bolts.
2
Remove the differential bearing caps.
4. WARNING: Do not allow the differential assembly to fall.
CAUTION: Place a block of wood between the pry bar and the differential housing to protect the machined surface from damage.
Using a pry bar and a block of wood, remove the differential assembly from the differential housing.
5. CAUTION: Separate and identify the bearing shims and bearing cups for location. Both the bearing shims and the bearing cups must be installed
in the same position as removed.
Identify the removal locations of the bearing shims and bearing cups.
6. Remove the rear axle drive pinion shaft oil slinger.
7. Using the special tool and a soft-faced hammer, drive the pinion assembly out of the front differential pinion bearing and remove it through the
rear of the differential housing.
