Crown Victoria V8-4.6L SOHC VIN W (2005)
9. Using the special tool, remove the pinion flange.
10. Force up on the metal flange of the drive pinion seal. Install gripping pliers and strike with a hammer until the drive pinion seal is removed.
^
Discard the seal.
Installation
1. Coat the new rear axle drive pinion seal lips with grease.
2. CAUTION: Installation without the correct tool can result in early seal failure.
CAUTION: If the rear axle drive pinion seal becomes misaligned during installation, remove the seal and install a new seal.
Using the special tool, install the rear axle drive pinion seal.
3. Lubricate the pinion flange splines with rear axle lubricant.
4. NOTE: Disregard the index marks if installing a new pinion flange.