Crown Victoria V8-4.6L VIN V Flex Fuel (2006)
Front Door Window Glass: Service and Repair
Front
FRONT DOOR WINDOW GLASS
Special Tool(s)
Special Tool(s)
Removal and Installation
1. Remove the front door trim panel.
2. Remove the speaker.
3. Remove the screws and position the driver door module (DDM) aside.
4. Position the upper and lower water shields aside.
5. Remove the rivets and position the door latch remote control aside.
6. Remove the 2 front door glass top run bolts.
-
To install, tighten to 12 Nm (9 lb-ft).
7. Remove the inner belt line moulding.
8. Remove the nut and outer belt line moulding.
-
To install, tighten to 12 Nm (9 lb-ft).
9. Position the front door glass run front retainer forward.
10. Connect the window control switch electrical connectors.
11. Connect the battery.
12. Lower the front door window glass to gain access to the rivets.
